Beginners Ultimate Guide To Learning About And Teaching 3D Printing
link to Who Can Teach 3D Printing? ( Skill, resources and future growth)Any person in the education field can teach 3D printing as long as they are comfortable using a 3D printer themselves. Though there is no specific degree necessary, educators would need to have...
link to Minimum child age to use 3D Printer: Risks, what not to do, and suggestions.There are specifically design 3d printers for kids that allow children at the age of 5 years and older to use the 3d printer under parental supervision. At this age, kids can understand all...
link to How To Take Supports Off A 3D Print Effectively?As important as supports may be, most makers would prefer to print without them if they could. This is because supports add to the material used, increase the amount of post-processing you need to...
link to How To 3D Print Logos (Or Anything)? Step By Step3D printing a logo takes a two-dimensional design and produces a tangible three-dimensional render. There are five main steps involved in producing a 3D-printed logo. These are the design, modeling,...
link to How Small Can A 3D Printer Print? What You Need To Know!Minimum diameters in 3D printers differ based on the technology. Resin printers have the smallest diameter, printing as low as 25 microns (0.25 millimeters). In comparison, the average FDM printer...
link to How To Change Filament Colour Mid Print? Should You Do It!There are a number of ways to make a 3D print really come to life. Smoothing for example can take the rough edges out of your print and make it look more professional. But if there is one thing...
link to How To Cut, Drill And Weld 3D Printed Plastic ?There are instances where it is necessary to cut away plastic for example to remove supports or any excess material. It could be your design might need to have holes or teeth as when designing a gear...
link to How To Melt / Soften PLA? (Heat, Tools & Chemicals)Post-processing a print involves among other things, smoothing it to remove layer lines and gaps to produce a better finish. It removes the “3D printed look” and makes it look more like an...