Skip to content
3d Print Schooling Logo
Search
  • 3D Printed Houses
  • About Filaments
  • Components & Functions
  • Learning & Teaching
    • Kids
    • Hacks
    • Environment & Safety
    • Jobs & Businesses
  • Contact Us
  • About Us

Posts by sherifjallad

link to What Nozzle Size Should You Use For 3D Printing? (Thin VS Thick)

What Nozzle Size Should You Use For 3D Printing? (Thin VS Thick)

Nozzle sizes range from the ultra-thin 0.1 millimeter to the thicker 1 millimeter diameter. Thinner diameters offer finer details while thicker diameters offer better print speed. The standard 0.4...

Continue Reading
link to What Happens If You Run Out Of Resin During A Print? (Solutions)

What Happens If You Run Out Of Resin During A Print? (Solutions)

In general, if you anticipate your resin will run out and you do not have more resin with which to top up your printer, the smart thing to do is pause the print. Once you have your refill, you can...

Continue Reading
link to Is A 3D Printing Filament Dryer Necessary? Cheaper Alternatives!

Is A 3D Printing Filament Dryer Necessary? Cheaper Alternatives!

Working with wet filament produces poor quality prints. Wet filament will always produce a print with flaws like bubbles or cracks. In some cases, wet filament will clog up the nozzle and jam the...

Continue Reading
link to What Is Resin 3D Printing? Resin vs FDM: Which Is Better!

What Is Resin 3D Printing? Resin vs FDM: Which Is Better!

Resin printing consists of three main printing processes, namely stereolithography (SLA), digital light processing (DLP) and masked stereolithography (MSLA). All these processes use light to harden...

Continue Reading
link to How Do I Choose The Right Filament? (Beginner Guide)

How Do I Choose The Right Filament? (Beginner Guide)

With such an array of materials to choose from, it can be difficult, especially for a beginner to choose the right one to work with. In this guide we go over the main filament types you need to know,...

Continue Reading
link to Does PETG Crack Easily? Stronger Substitutes!

Does PETG Crack Easily? Stronger Substitutes!

PETG is a middle ground between PLA and ABS. It has the ease of use of PLA while being as strong as ABS. With that said, PETG demonstrates better strength than either PLA or ABS, even though for many...

Continue Reading
« PREV Page 1 … Page 4 Page 5 Page 6 Page 7 Page 8 … Page 22 NEXT »

About the Author

I am a very well experienced techie civil engineer who's extensively interested in 3D printing technology and even more captivated by the potential of 3D printing livable structures

  • Terms and conditions
  • Privacy policy
  • About Us
2025 Copyright Solar Portable Panel - [email protected]